Aluminum Sheet / Plate
Aluminum Coil / Strip
Aluminum Ingot
Aluminum Tube/Pipe
Aluminum Round Bar/Rod
Aluminum Channel
Aluminum Tread Plate
Aluminum Foil
Aluminum Customized Profile
Aluminum Disc
7075 Aluminum Sheet/Plate
Aluminum Square Bar
Color Coated Aluminum Coil
99.9% high-quality aluminum ingots
Aluminum Flat Bar
1100 Aluminum Sheet/Plate
1050 Aluminum Coil
1050 Aluminum Sheet/Plate
Aluminum Angle Bar
1070 Aluminum Sheet/Plate
3003 Aluminum Pipe/Tube
5052 Aluminum Pipe/Tube
A7 A8 A9 aluminum ingots
7075 Aluminum Pipe/Tube
1060 Aluminum Pipe/Tube
6061 Aluminum Sheet/Plate
5083 Aluminum Pipe/Tube
1060 Aluminum Sheet/Plate
5052 Aluminum Coil
1060 Aluminum CoilProduct Specification and Size :
Standard Specification: GB/T 3618, Base material conforms to GB/T 3880
| Alloy | Temper | Remarks |
| 1xxx: 1050, 1060, 1100 | O, H114, H194 | H114 fabricated from Temper O H194 fabricated from Temper H18 ★Temper H12, H14, H22, H24, H32 and H34, which are applied to base material, are provided as per client’s request and mutually agreed. |
| 3xxx: 3003, 3105 | ||
| 5xxx: 5052, 5754 | O, H114 |
Alloy Designation (For Reference)
Comparison of Alloy Designations for Aluminum Products
| Alloy Series | Chinese Standard | American Standard | European Standard |
| 1xxx Series | 1050 | - | - |
| 1060 | 1060 | - | |
| 1100 | 1100 | - | |
| 3xxx Series | 3003 | 3003 | EN AW-3003 |
| 3105 | 3105 | EN AW-3105 | |
| 5xxx Series | 5052 | 5052 | EN AW-5052 |
| - | 5754 | EN AW-5754 |
Temper Designation (For Reference)
| Temper | Definition |
| O | Annealed |
| H114 H194 | H114 fabricated from Temper O H194 fabricated from Temper H18 |
| Temper H12, H14, H22, H24, H32 and H34, which are applied to base material, are provided as per client’s request and mutually agreed. | |
Available Size Range
| Dimension | Thickness | Width | Length |
| Range | 1.5 ~ 4.5mm | 1,000 ~ 1,600mm | 2,000 ~ 4,000mm |
- Surface Finish: Bright finish, Mill finish
- Pattern Type: Small Five Bar, Big Five Bar, Diamond
- Raised Pattern:
| Pattern Type | Small Five Bar | Big Five Bar | Diamond |
| Pattern Height | 1.0mm, +/-0.4mm | 1.0mm, +/-0.4mm | 1.0mm, +/-0.4mm |
| Pattern Length | 35mm, +/-3.0mm | 45mm, +/-3.0mm | 33mm, +/-2.0mm |
Application
Aluminum and aluminum alloy tread sheet is a high-cost modern material. It can be widely applied to flooring, wall panel, tool box, transportation and other building applications.
| Type | Application |
| Construction | Curtain walls, cladding, ceiling, heat insulation, venetian blind block, etc. |
| Transportation | Automobile parts, bus bodies, aviation, shipping and air-cargo containers, etc. |
| Electronic Appliance | Electrical appliances, telecommunication equipment, PC board drilling guide sheets, lighting and heat radiating materials, etc. |
| Consumer Goods | Parasols and umbrellas, cooking utensils, sports equipment, etc. |
| Other | Military usage, color coated aluminum sheet |
Chemical Composition (For Reference)
Chemical Composition conforms to Chinese, American and European standard specification
| Alloy | Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | Others: Each | Others: Total | Al: Min. |
| 1050 | 0.25 | 0.40 | 0.05 | 0.05 | 0.05 | - | 0.05 | 0.03 | 0.03 | - | 99.50 |
| 1050A | 0.25 | 0.40 | 0.05 | 0.05 | 0.05 | - | 0.07 | 0.05 | 0.03 | - | 99.50 |
| 1060 | 0.25 | 0.35 | 0.05 | 0.03 | 0.03 | - | 0.05 | 0.03 | 0.03 | - | 99.60 |
| 1100 | 0.95 Si + Fe | 0.05~0.20 | 0.05 | - | - | 0.10 | - | 0.05 | 0.15 | 99.0 | |
| 3003 | 0.60 | 0.70 | 0.05~0.20 | 1.0~1.5 | - | - | 0.10 | - | 0.05 | 0.15 | remainder |
| 3105 | 0.60 | 0.70 | 0.03 | 0.3~0.8 | 0.2~0.8 | 0.20 | 0.40 | 0.10 | 0.05 | 0.15 | remainder |
| 5052 | 0.25 | 0.40 | 0.10 | 0.10 | 2.2~2.8 | 0.15~0.35 | 0.10 | - | 0.05 | 0.15 | remainder |
| 5754 | 0.40 | 0.40 | 0.10 | 0.50 | 2.6~3.6 | 0.30 | 0.20 | 0.15 | 0.05 | 0.15 | remainder |