Inconel Plate/Sheet ASTM
Hastelloy B-3 Nickel Alloy Bar
Inconel 725 Plate/Sheet
Hastelloy C-276 Nickel Alloy Bar
Incoloy 800/800H/HT Bar/Rod
Monel 400 Alloy Pipe/Tube
Incoloy 800/800H/HT Pipe/Tube
Inconel 718 Plate/Sheet
Hastelloy C-276 Plate/Sheet
Hastelloy C-276 Coil/Strip
Inconel 600 Plate/Sheet
Hastelloy X Alloy Plate/Sheet
Inconel 625 Plate/Sheet
Monel K500 Alloy Coil/Strip
Incoloy 800/800H/HT Plate/Sheet
Monel 400 Alloy Plate/Sheet
Monel K500 Alloy Pipe/Tube
Incoloy 800/800H/HT Coil
Incoloy 825 Alloy Coil
Hastelloy C22 Nickel Alloy Bar
Monel K500 Alloy Bar
Inconel Alloy Coil/Strip
Incoloy 825 Pipe/Tube
Monel K500 Alloy Plate/Sheet
Incoloy 825 Plate/Sheet
Monel 400 Alloy Coil/Strip
Incoloy 825 Alloy Bar
Inconel Alloy Wire| Product Name | Monel 500 Alloy Plate/Sheet (UNS N05500) | |
| Technology | Hot rolled , Cold rolled | |
| Grade | Inconel 600, Inconel 601, Inconel 625, Inconel 617, Inconel 690, Inconel 718, Inconel X-750 | |
Incoloy A-286, Incoloy 800, Incoloy 800H, Incoloy 800HT Incoloy 825, Incoloy 901, Incoloy 925, Incoloy 926 | ||
| Monel 400, Monel K-500 | ||
| Hastelloy C22, Hastelloy C-276, Hastelloy B-2, Hastelloy B-3, Hastelloy X | ||
| Specifications | ASTM, ASME, UNS, JIS, EN, AFNOR | |
| Surface | 2B, 2D, BA, NO.1, NO.4, NO.8, 8K, mirror, checkered, embossed, hair line, sand blast, Brush, etching, etc | |
| Processing Service | Machining : Turning / Milling / Planing / Drilling / Boring / Grinding / Gear Cutting / CNC Machining Deformation processing : Bending / Cutting / Rolling / Stamping | |
| Delivery time | 10-30 days subject to the clients' requirement and quantity | |
| Package | clients' requirement and Standard export sea-worthy packing | |
| MOQ | 1 ton | |
Available Size Range
| Dimension | Range |
| thickness | 0.2-100mm |
| Width | 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, etc. or customer's request |
| Length | 1000mm~6000mm, or as customer's request |
Chemical Analysis
| % | NI | Cu | Fe | C | Mn | Si | S | |
| Monel 400 | Min. | 63 | 28 | - | - | - | - | - |
| Max. | - | 34 | 2.5 | 0.3 | 2 | 0.5 | 0.024 |
| % | Ni | Cu | Fe | C | Mn | Si | S | Al | Ti | |
| Monel K500 | Min. | 63 | 27 | - | - | - | - | - | 2.3 | 0.35 |
| Max. | - | 33 | 2 | 0.18 | 1.5 | 0.5 | 0.01 | 3.15 | 0.85 |
Physical Properties
| Density | Melting Range | Tensile Strength | Yield Strength | Elongation |
| 8.05G/CM3 | 1288-1343℃ | RM N/mm² | RPO.2 N/mm² | A5% |
| 960 | 690 | 20 |
About Monel K500
Monel K500 is a precipitation-hardenable nickel-copper alloy that combines the excellent corrosion resistance characteristic of Monel 400 with the added advantage of greater strength and hardness. These amplified properties, strength and hardness, are obtained by adding aluminum and titanium to the nickel-copper base and by a thermal processing used to effect precipitation, typically called age hardening or aging. When in the age-hardened condition, Monel K-500 has a greater tendency toward stress-corrosion cracking in some environments than Monel 400. Alloy K-500 has approximately three times the yield strength and double the tensile strength when compared with alloy 400. Plus, it can be further strengthened by cold working prior to precipitation hardening. The strength of this nickel steel alloy is maintained to 1200° F but stays ductile and tough down to temperatures of 400° F. Its melting range is 1288-1343℃.
Applications
- Sour-gas service applications
- Oil-well tools and instruments
- Pump shafts and impellers in marine
- Doctor blades and scrapers